Component
Hydraulic Fittings
The ones that are not in anybody’s catalogue.
Adaptors, banjos, bulkheads, port fittings and reducers, made to your drawing in steel and stainless. We do not sell catalogue fittings by the box. We supply the awkward one in the middle of the assembly that nobody stocks.
- 4 Thread families: BSP, NPT, JIC and metric
- 0 Catalogue minimum, because these are made to your print
- 100% Batches inspected by Coler before dispatch
Hydraulic fittings at Coler
Most hydraulic fittings you can buy from a factors in an afternoon, and you should. The ones that stop a build are the others: an adaptor with two thread forms that nobody pairs, a banjo at an angle no catalogue offers, a bulkhead with a spigot length set by the panel rather than by a standard, a port fitting on an obsolete machine where the original supplier has gone.
That is the work we take. Every fitting here is made to your drawing or copied from a sample, turned from bar and finished to the specification on the print. We source and manage them; the turning runs on partner machines we qualified, and the part is inspected by us before it ships.
Because these are specials rather than stock, the quantity question works the other way round from a catalogue. There is no minimum order imposed by a box size, and there is no tooling to pay for, because a turned fitting needs only a program. What drives the price is the thread count, the material and how many you want.
Sealing is the thing worth being precise about on the drawing. A BSPP fitting seals on a bonded washer or an O ring at the face. A BSPT or NPT fitting seals on the thread taper itself. JIC seals on a 37 degree flare. These are not interchangeable even where they will screw together, and mixing them is the most common cause of a joint that weeps.
Send a sample if you have one and no drawing. We can measure a fitting and reverse the drawing from it, which is often faster than finding the original print.
The usual route for an obsolete fitting
- Threads
- BSP, NPT, JIC
- Materials
- Steel, stainless
- Tolerance
- To 0.01mm
- Finishes
- Zinc, passivate
- Quantity
- From 1
- Tooling
- None needed
Also available
- Reverse engineering from a sample when the original drawing is lost
- Pressure testing to the figure on your drawing
- Zinc plating, passivation and GeoMet through our finishing partners
- Material certification and traceability on every batch
Specification
What we need to quote a fitting
Thread forms at both ends, the material and the quantity gets you a price. A sample does just as well as a drawing.
| Thread form | BSPP, BSPT, NPT, JIC, metricBoth ends. Parallel and taper seal differently and are not interchangeable even when they engage. |
|---|---|
| Material | Carbon steel and stainless316 stainless where the fluid or the environment is corrosive, carbon steel otherwise. |
| Body form | To drawingStraight, elbow, tee, cross, banjo or bulkhead. The angle is yours to set, not a catalogue’s. |
| Across flats | To drawingSets the spanner size. Worth checking against the access on the assembly before it is made. |
| Working pressure | To drawingDrives the wall thickness and the material. Tell us the test pressure as well if there is one. |
| Finish | Zinc plate, passivate, GeoMetFrom our plating partners, on the same order. |
| Quantity | From one upwardsNo tooling, so a prototype and a production batch are quoted the same way. |
Send a drawing, or post us the fitting you are replacing, and we will come back with a price and a lead time. Request a quote.
Why buyers come to Coler for this
-
01
We chose the plant
We do not own the machines. We qualified the people running them over 25 years, we part funded a good deal of the plant, and we place the work where it actually fits.
-
02
The inspection is ours
Every batch is checked by us before it leaves. That is a second check on the plant, not a certificate you have to take on trust.
-
03
One order, one contact
Casting, machining and finishing go on one schedule and one purchase order, so the part does not sit waiting between two suppliers.
-
04
ISO 9001:2015
Held by Coler. The plants hold their own standards and we send the relevant certificate with the quote rather than waiting to be asked.
-
05
Specials, not catalogue
Almost everything here is made to your drawing. If you need it to a print, that is the normal job rather than the awkward one.
-
06
Stock held for you
Order up to twelve months ahead and call it off as you need it, which takes the lead time out of your own planning.
Read next
Related components
Other parts we supply as specials rather than off a shelf.
Related
-
Banjo bolts
The bolt that goes through the banjo fitting, to your drawing.
-
Fasteners and spacers
Turned specials, not catalogue items.
-
P clamps
What holds the hose once the fitting is on the end of it.
-
CNC turning
The process behind almost every fitting on this page.
-
Assemblies
Fittings supplied built into a finished assembly rather than loose.
-
Materials
Grades, and which ones suit the fluid you are carrying.
Do you sell standard catalogue fittings?
No, and we would rather say so plainly. If you need a hundred standard BSP adaptors, a hydraulics factors will be cheaper and faster than us and you should use one.
What we do is the fitting that is not in the catalogue: a thread combination nobody pairs, an angle nobody offers, a length set by your panel, or a replacement for something obsolete. That is a made to drawing part, and it is the job we are set up for.
What is the difference between BSP, NPT and JIC?
BSPP is British Standard Pipe Parallel. The thread does not seal; the seal is made at the face by a bonded washer or an O ring. Common across UK and European equipment.
BSPT is the taper version. The thread itself seals as it tightens, usually with a sealant.
NPT is the American taper thread. It looks similar to BSPT and is not compatible with it: the thread angle is 60 degrees against BSP’s 55, and the pitches differ. Forcing one into the other damages both and leaks.
JIC seals on a 37 degree flare between the fitting and the nut, with the thread only providing the clamping force. Very common in mobile hydraulics.
If you are unsure what is on the machine, send us the fitting. Measuring it is quicker than guessing.
Can you copy a fitting I cannot identify?
Usually yes, and this is a large part of what the service is for. Send the sample. We measure the thread forms, the body geometry and the sealing faces, produce a drawing, and quote from that.
You get the drawing as well as the part, which matters more than it sounds: next time the fitting is needed there is a print rather than a hunt for another sample.
Who makes them?
Partner machine shops we have qualified, not plants Coler owns. Coler does not own machines. We specify the job, choose the shop, and inspect every batch before it ships.
Coler Supply Solutions (Intl) Ltd holds ISO 9001:2015. The plants hold their own standards and we send the relevant certificate with the quote.
Get in touch today
Start with a drawing and a quantity
A single problem component, or a package you want off four suppliers and onto one. Tell us what you need and we will come back with a price, a process and a lead time.
Call us today on 01827 712910 Monday to Friday, 8am to 5pm · sales@coler.co.uk- The team picks up every quote within the hour
- NDAs signed before you send anything sensitive
- You speak to an engineer, not a call handler
Enquiry
Request a quote
Fill this in and the right person comes back to you. Got a drawing ready? Use the full quote form to attach it now.